SWAN Stainless Steel Panel Corner Forming Machine for Enclosures

SWAN Stainless Steel Panel corner forming machine forming prefect corners, No longer needed welding, NO set up. NO welding. NO grinding. NO finishing. NO polishing

This machine is used in the processing of sheet metal corner moulding such as cold-rolled plate, aluminum plate, stainless steel pl ate, copper plate etc.

 Widely used in the switching door ,cover plate, aluminum single panel curtain wall,  switchboard, container cover, household appliances, instruments and other fields.

 The machine owns twin shear function，the integrated shearing and forming function can be chosen in mass production, the corner can be formed and sheared without changing shearing position, saving physical capability. when the production is of great variety, in small batch, the separated forming and shearing function can be chosen, when the flange height is below 30mm, the flange height can be flexible and changeable, the work piece can be finished directly just change the station to shear after the corner is formed. This machine is one of the most advanced models in the world recently. Install safety light curtain protection to make the production process more safe and humanistic. Adopt the imported first-class brand components as our key electrical components to ensure the reliability and stabilit​y of the system.

 The PLC controller with 68 points can store and save lots of sheet metal corner moulding technologies, gap compensation coefficients. At the same time, it can save and rewrite the coefficients of special materials and even the complex bimetal at any time.

This machine improves shearing efficiency more than six times by changing the tedious process of open-angle welding, grinding etc into rolling forming directly .it saves labor, electricity, gas, grinding material and other accessories for enterprises, therefore, it is both environmentally friendly and greatly reduces the production cost, could be regarded as the enterprise save-money expert.

PRODUCT PROFILES

Corner Forming DieR CO

Features:

The flexible corner former for panel and door fabrication allows you to create high quality corners up to 10x faster than welding, which reduces cost.
A new flexible state of the art technology known as: FLEXIBLE Corner Forming Machinegives new opportunities in metal sheet production of panels or doors. Cold forming of corners on doors or panels in any material formable (Mild Steel, Stainless Steel, Aluminium, alloys and others) allow to use any material thickness and individual flange heights
Corner Forming Machine COST & TIME SAVINGS:
Cost Saving：no welding, no hand finishing work; only 1 operator required; elimination of abrasives and welding consumables;

SPECIFICATION:

Comparison of Traditional Processing Technology and Corner Forming Process: